Difference between revisions of "IPv6: Mikrotik: BGP Example"
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 66: | Line 66: | ||
routing bgp network add network=199.2.2.0/24 | routing bgp network add network=199.2.2.0/24 | ||
routing bgp network add network=2a99:2:2::/48 | routing bgp network add network=2a99:2:2::/48 | ||
| + | /routing bgp peer | ||
| + | add name=toISP1 remote-address=192.168.3.1 remote-as=10 address-families=ip,ipv6 | ||
| + | add name=toISP3 remote-address=192.168.2.2 remote-as=30 address-families=ip,ipv6 | ||
| + | add name=toISP1 remote-address=2001:192:168:3::1 remote-as=10 address-families=ip,ipv6 | ||
| + | add name=toISP3 remote-address=2001:192:168:2::2 remote-as=30 address-families=ip,ipv6 | ||
Revision as of 12:10, 24 January 2019
Sumber: http://www.obriain.com/mikrotik/mikrotik-ISP2-configuration.html
Enable IPv6 package
The network is configured for both IPv4 and IPv6 so enable IPv6 which is disabled by default.
system package print
Flags: X - disabled
# NAME VERSION SCHEDULED
0 routeros-mipsbe 6.38.7
1 system 6.38.7
2 X ipv6 6.38.7
3 wireless 6.38.7
4 hotspot 6.38.7
5 dhcp 6.38.7
6 mpls 6.38.7
7 routing 6.38.7
8 ppp 6.38.7
9 security 6.38.7
10 advanced-tools 6.38.7
system package enable 2
Reset the configuration
system reset-configuration no-defaults=yes
System identity
Add a system identity.
system identity set name=ISP2
IP addressing
Add IP Addresses to the interfaces.
interface bridge add name=loopback0 ip address add address=200.2.2.2/32 interface=loopback0 ip address add address=199.9.9.22/24 interface=ether1 ipv6 address add address=2a99:9:9::22/48 interface=ether1 ip address add address=199.2.2.1/24 interface=ether2 ipv6 address add address=2a99:2:2::1/48 interface=ether2 ip address print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 200.2.2.2/32 200.2.2.2 loopback0 1 199.9.9.22/24 199.9.9.0 ether1 2 199.2.2.1/24 199.2.2.0 ether2 ipv6 address print Flags: X - disabled, I - invalid, D - dynamic, G - global, L - link-local # ADDRESS FROM-POOL INTERFACE ADVERTISE 0 DL fe80::d6ca:6dff:fee4:16b2/64 ether4 no 1 IG 2a99:9:9::22/48 ether1 yes 2 IG 2a99:2:2::1/48 ether2 yes
BGP Configuration
routing bgp instance add name=ASN5222 as=5222 router-id=200.2.2.2 routing bgp network add network=199.2.2.0/24 routing bgp network add network=2a99:2:2::/48 /routing bgp peer add name=toISP1 remote-address=192.168.3.1 remote-as=10 address-families=ip,ipv6 add name=toISP3 remote-address=192.168.2.2 remote-as=30 address-families=ip,ipv6 add name=toISP1 remote-address=2001:192:168:3::1 remote-as=10 address-families=ip,ipv6 add name=toISP3 remote-address=2001:192:168:2::2 remote-as=30 address-families=ip,ipv6
Create BGP ingress Filters
Ingress filters are used to filter advertisements into the network. Best practice for ingress filters for all peers are:
Discard receiving ones own prefix Discard receiving a default route as we are doing full routing Discard special purpose address registry entries stated at RFC 6890.
Chain IN-IXP-IPv4 is an input filter and it discards receiving ones own prefix or a default route as full routing is taking place. This filter jumps to a further chain IN-RFC-6890-IPv4 that discards IPv4 Special-Purpose Address Registry Entries stated at RFC 6890.
routing filter add chain=IN-IXP-IPv4 prefix=199.2.2.0/24 action=discard routing filter add chain=IN-IXP-IPv4 prefix=0.0.0.0/0 action=discard routing filter add chain=IN-IXP-IPv4 action=jump jump-target=IN-RFC-6890-IPv4 routing filter add chain=IN-RFC-6890-IPv4 prefix=0.0.0.0/8 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=10.0.0.0/8 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=100.64.0.0/10 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=127.0.0.0/8 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=169.254.0.0/16 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=172.16.0.0/12 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=192.0.2.0/24 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=192.88.99.0/24 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=192.168.0.0/16 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=198.18.0.0/15 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=198.51.100.0/24 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=203.0.113.0/24 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=240.0.0.0/4 action=discard routing filter add chain=IN-RFC-6890-IPv4 prefix=255.255.255.255/32 action=discard
Chain IN-IXP-IPv6 is an input filter and it discards receiving ones own IPv6 prefix or a default route as full routing is taking place. This filter jumps to a further chain IN-RFC-6890-IPv6 that discards IPv6 Special-Purpose Address Registry Entries stated at RFC 6890.
routing filter add chain=IN-IXP-IPv6 prefix=2a99:2:2::/48 action=discard routing filter add chain=IN-IXP-IPv6 prefix=::/0 action=discard routing filter add chain=IN-IXP-IPv6 action=jump jump-target=IN-RFC-6890-IPv6 routing filter add chain=IN-RFC-6890-IPv6 prefix=::1/128 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=::/128 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=64:ff9b::/96 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=::ffff:0:0/96 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=100::/64 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=2001::/23 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=2001::/32 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=2001:2::/48 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=2001:db8::/32 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=2001:10::/28 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=2002::/16 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=fc00::/7 action=discard routing filter add chain=IN-RFC-6890-IPv6 prefix=fe80::/10 action=discard
Create BGP egress Filters
Egress filters are used to filter advertisements from the network, limiting it to only advertise the specific local networks. Note the invert-match=yes statement, this instructs the filter to discard all but the prefix specified.
routing filter add chain=OUT-IPv4 prefix=199.2.2.0/24 invert-match=yes action=discard routing filter add chain=OUT-IPv6 prefix=2a99:2:2::/48 invert-match=yes action=discard
Add BGP Peers
Create the peer links to the other BGP peers for IPv4 and IPv6. Note that IPv4 family is the default and for IPv6 the family must be specified.
routing bgp peer add name=ixp instance=ASN5222 remote-as=5999 remote-address=199.9.9.1 in-filter=IN-IXP-IPv4 out-filter=OUT-IPv4 routing bgp peer add name=ixp instance=ASN5222 remote-as=5999 remote-address=2a99:9:9::1 address-families=ipv6 in-filter=IN-IXP-IPv6 out-filter=OUT-IPv6
Referensi
Pranala Menarik