Difference between revisions of "BIRD: Static Routing Sederhana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 43: | Line 43: | ||
router id 172.16.1.1; | router id 172.16.1.1; | ||
| − | + | protocol kernel { | |
| − | + | import all; | |
| − | + | export all; | |
| − | + | learn; | |
| − | + | scan time 20; | |
| − | + | } | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
protocol device { | protocol device { | ||
| + | import all; | ||
| + | export all; | ||
| + | scan time 10; # Scan interfaces every 10 seconds | ||
} | } | ||
| − | + | protocol static { | |
| − | protocol static | ||
| − | |||
route 192.168.2.0/24 via 172.16.1.2; | route 192.168.2.0/24 via 172.16.1.2; | ||
} | } | ||
| Line 72: | Line 60: | ||
Restart BIRD | Restart BIRD | ||
| − | |||
| − | |||
| − | |||
| − | |||
# BIRD di OpenWRT | # BIRD di OpenWRT | ||
| − | killall | + | killall zebra |
| − | + | killall bgpd | |
| + | killall watchquagga | ||
| + | killall ospfd | ||
| + | killall ospf6d | ||
| + | killall ripd | ||
| + | killall ripngd | ||
| + | killall bird4 | ||
| + | bird4 | ||
R2: | R2: | ||
| Line 89: | Line 80: | ||
router id 172.16.1.2; | router id 172.16.1.2; | ||
| − | + | protocol kernel { | |
| − | + | import all; | |
| − | + | export all; | |
| − | + | learn; | |
| − | + | scan time 20; | |
| − | + | } | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
protocol device { | protocol device { | ||
| + | import all; | ||
| + | export all; | ||
| + | scan time 10; # Scan interfaces every 10 seconds | ||
} | } | ||
| − | + | protocol static { | |
| − | protocol static | ||
| − | |||
route 192.168.1.0/24 via 172.16.1.1; | route 192.168.1.0/24 via 172.16.1.1; | ||
} | } | ||
Restart BIRD | Restart BIRD | ||
| − | |||
| − | |||
| − | |||
| − | |||
# BIRD di OpenWRT | # BIRD di OpenWRT | ||
| − | killall | + | killall zebra |
| − | + | killall bgpd | |
| + | killall watchquagga | ||
| + | killall ospfd | ||
| + | killall ospf6d | ||
| + | killall ripd | ||
| + | killall ripngd | ||
| + | killall bird4 | ||
| + | bird4 | ||
==Cek== | ==Cek== | ||
| Line 130: | Line 112: | ||
jalankan di shell | jalankan di shell | ||
| − | + | birdc4 | |
ketik | ketik | ||
| Line 163: | Line 145: | ||
* https://wiki.mikrotik.com/wiki/Manual:Simple_Static_Routing | * https://wiki.mikrotik.com/wiki/Manual:Simple_Static_Routing | ||
| − | |||
| Line 174: | Line 155: | ||
* [[Cisco]] | * [[Cisco]] | ||
* [[Juniper]] | * [[Juniper]] | ||
| − | * [[ | + | * [[BIRD1]] |
| + | * [[BIRD2]] | ||
* [[IPv6]] | * [[IPv6]] | ||
| Line 184: | Line 166: | ||
* [[IPv6: Cisco]] | * [[IPv6: Cisco]] | ||
* [[IPv6: Juniper]] | * [[IPv6: Juniper]] | ||
| − | * [[IPv6: | + | * [[IPv6: BIRD1]] |
| + | * [[IPv6: BIRD2]] | ||
* [[IPv6]] | * [[IPv6]] | ||
Latest revision as of 10:24, 18 January 2019
Topologi
R1 e1 --> CLOUD nat0 e2 --> R2 e1 e3 --> LAN 192.168.1.1/24
R2 e1 --> R1 e2 e2 --> LAN 192.168.2.1/24
Jika menggunakan BIRD appliance di GNS3, maka PC / laptop kita perlu menjalankan
sudo chown root:onno /dev/kvm
Tapi jika menggunakan BIRD VirtualBox (dari OpenWRT), kita tidak perlu menjalankan perintah di atas.
Konfigurasi Shell
R1:
ifconfig eth1 192.168.122.100 netmask 255.255.255.0 ifconfig eth2 172.16.1.1 netmask 255.255.255.252 ifconfig eth3 192.168.1.1 netmask 255.255.255.0
R2:
ifconfig eth1 172.16.1.2 netmask 255.255.255.252 ifconfig eth2 192.168.2.1 netmask 255.255.255.0
Routing
R1:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
router id 172.16.1.1;
protocol kernel {
import all;
export all;
learn;
scan time 20;
}
protocol device {
import all;
export all;
scan time 10; # Scan interfaces every 10 seconds
}
protocol static {
route 192.168.2.0/24 via 172.16.1.2;
}
Restart BIRD
# BIRD di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
R2:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf
edit
router id 172.16.1.2;
protocol kernel {
import all;
export all;
learn;
scan time 20;
}
protocol device {
import all;
export all;
scan time 10; # Scan interfaces every 10 seconds
}
protocol static {
route 192.168.1.0/24 via 172.16.1.1;
}
Restart BIRD
# BIRD di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
Cek
jalankan di shell
birdc4
ketik
show interfaces show static
Test
R1:
ping 172.16.1.2 ping 192.168.2.1
R2:
ping 172.16.1.1 ping 192.168.1.1
Setting Client
LAN 1 Client:
ip 192.168.1.100/24 192.168.1.1
LAN 2 Client:
ip 192.168.2.100/24 192.168.1.1
Referensi
Pranala Menarik