Difference between revisions of "BIRD: OSPF Sederhana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) (→OSPF) |
Onnowpurbo (talk | contribs) |
||
(9 intermediate revisions by the same user not shown) | |||
Line 25: | Line 25: | ||
==IP address== | ==IP address== | ||
+ | |||
+ | Reset konfigurasi OpenWRT menggunakan teknik [[BIRD: dari OpenWRT]] | ||
+ | |||
R1: | R1: | ||
Line 71: | Line 74: | ||
router id 10.10.1.1; | router id 10.10.1.1; | ||
protocol kernel { | protocol kernel { | ||
− | + | import all; | |
− | + | export all; | |
− | + | learn; | |
− | + | scan time 20; | |
− | |||
} | } | ||
protocol device { | protocol device { | ||
− | + | import all; | |
− | + | export all; | |
− | + | scan time 10; | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
} | } | ||
+ | protocol ospf { | ||
+ | import all; | ||
+ | export all; | ||
+ | area 0 { | ||
+ | # networks { | ||
+ | # 10.10.1.0/30; | ||
+ | # 10.10.1.4/30; | ||
+ | # }; | ||
+ | interface eth1, eth2, eth3 { | ||
+ | cost 5; | ||
+ | type broadcast; | ||
+ | hello 5; retransmit 2; wait 10; dead 20; | ||
+ | }; | ||
+ | }; | ||
+ | } | ||
# BIRD1 di OpenWRT | # BIRD1 di OpenWRT | ||
Line 116: | Line 118: | ||
edit | edit | ||
+ | log syslog all; | ||
router id 10.10.1.6; | router id 10.10.1.6; | ||
− | + | protocol kernel { | |
− | + | import all; | |
− | + | export all; | |
− | + | learn; | |
− | + | scan time 20; | |
− | + | } | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
protocol device { | protocol device { | ||
+ | import all; | ||
+ | export all; | ||
+ | scan time 10; | ||
} | } | ||
− | protocol ospf | + | protocol ospf { |
− | + | import all; | |
− | + | export all; | |
− | + | area 0 { | |
− | + | # networks { | |
− | + | # 10.10.1.4/30; | |
− | + | # 10.10.1.8/30; | |
− | + | # 172.16.0.0/16; | |
− | + | # }; | |
− | + | interface "eth1", "eth2", "eth3" { | |
− | + | cost 5; | |
− | + | type broadcast; | |
− | + | hello 5; retransmit 2; wait 10; dead 20; | |
− | + | }; | |
− | + | }; | |
− | + | } | |
− | |||
− | } | ||
# BIRD1 di OpenWRT | # BIRD1 di OpenWRT | ||
Line 175: | Line 166: | ||
edit | edit | ||
+ | log syslog all; | ||
router id 10.10.1.2; | router id 10.10.1.2; | ||
− | + | protocol kernel { | |
− | + | import all; | |
− | + | export all; | |
− | + | learn; | |
− | + | scan time 20; | |
− | + | } | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
protocol device { | protocol device { | ||
+ | import all; | ||
+ | export all; | ||
+ | scan time 10; | ||
} | } | ||
− | protocol ospf | + | protocol ospf { |
− | + | import all; | |
− | + | export all; | |
− | + | area 0 { | |
− | + | # networks { | |
− | + | # 10.10.1.0/30; | |
− | + | # 10.10.1.8/30; | |
− | + | # 192.168.1.0/24; | |
− | + | # }; | |
− | + | interface "eth1", "eth2", "eth3" { | |
− | + | cost 5; | |
− | + | type broadcast; | |
− | + | hello 5; retransmit 2; wait 10; dead 20; | |
− | + | }; | |
− | + | }; | |
− | |||
− | |||
} | } | ||
Line 231: | Line 211: | ||
Cek R1, R2, R3 | Cek R1, R2, R3 | ||
− | show | + | show protocols ospf1 |
− | + | show ospf | |
− | show | + | show route |
− | show | ||
==Referensi== | ==Referensi== | ||
Line 240: | Line 219: | ||
* https://wiki.mikrotik.com/wiki/Manual:OSPF-examples | * https://wiki.mikrotik.com/wiki/Manual:OSPF-examples | ||
* https://github.com/BIRD/bird/blob/master/doc/bird.conf.example | * https://github.com/BIRD/bird/blob/master/doc/bird.conf.example | ||
+ | |||
==Pranala Menarik== | ==Pranala Menarik== | ||
Line 249: | Line 229: | ||
* [[Cisco]] | * [[Cisco]] | ||
* [[Juniper]] | * [[Juniper]] | ||
− | * [[ | + | * [[BIRD1]] |
+ | * [[BIRD2]] | ||
* [[IPv6]] | * [[IPv6]] | ||
Line 259: | Line 240: | ||
* [[IPv6: Cisco]] | * [[IPv6: Cisco]] | ||
* [[IPv6: Juniper]] | * [[IPv6: Juniper]] | ||
− | * [[IPv6: | + | * [[IPv6: BIRD1]] |
+ | * [[IPv6: BIRD2]] | ||
* [[IPv6]] | * [[IPv6]] |
Latest revision as of 10:23, 18 January 2019
Sambungan
R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet
R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3: -- LAN 172.16.1.1/16
R3: eth1: -- R1: eth1 eth2: -- R2: eth2 eth3: -- LAN 192.168.1.1/24
IP address
Reset konfigurasi OpenWRT menggunakan teknik BIRD: dari OpenWRT
R1:
ifconfig eth1 10.10.1.1 netmask 255.255.255.252 ifconfig eth2 10.10.1.5 netmask 255.255.255.252 ifconfig eth3 192.168.122.100 netmask 255.255.255.0 ifconfig eth3 192.168.122.101 netmask 255.255.255.0 ifconfig eth3 192.168.122.102 netmask 255.255.255.0
Router2:
ifconfig eth1 10.10.1.6 netmask 255.255.255.252 ifconfig eth2 10.10.1.9 netmask 255.255.255.252 ifconfig eth3 172.16.1.1 netmask 255.255.0.0
Router3:
ifconfig eth1 10.10.1.2 netmask 255.255.255.252 ifconfig eth2 10.10.1.10 netmask 255.255.255.252 ifconfig eth3 192.168.1.1 netmask 255.255.255.0
OSPF
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
log syslog all; router id 10.10.1.1; protocol kernel { import all; export all; learn; scan time 20; } protocol device { import all; export all; scan time 10; } protocol ospf { import all; export all; area 0 { # networks { # 10.10.1.0/30; # 10.10.1.4/30; # }; interface eth1, eth2, eth3 { cost 5; type broadcast; hello 5; retransmit 2; wait 10; dead 20; }; }; }
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
R2:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
log syslog all; router id 10.10.1.6; protocol kernel { import all; export all; learn; scan time 20; } protocol device { import all; export all; scan time 10; } protocol ospf { import all; export all; area 0 { # networks { # 10.10.1.4/30; # 10.10.1.8/30; # 172.16.0.0/16; # }; interface "eth1", "eth2", "eth3" { cost 5; type broadcast; hello 5; retransmit 2; wait 10; dead 20; }; }; }
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
R3:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
log syslog all; router id 10.10.1.2; protocol kernel { import all; export all; learn; scan time 20; } protocol device { import all; export all; scan time 10; } protocol ospf { import all; export all; area 0 { # networks { # 10.10.1.0/30; # 10.10.1.8/30; # 192.168.1.0/24; # }; interface "eth1", "eth2", "eth3" { cost 5; type broadcast; hello 5; retransmit 2; wait 10; dead 20; }; }; }
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
Verify
Cek R1, R2, R3
show protocols ospf1 show ospf show route
Referensi
- https://wiki.mikrotik.com/wiki/Manual:OSPF-examples
- https://github.com/BIRD/bird/blob/master/doc/bird.conf.example
Pranala Menarik