Difference between revisions of "BIRD2: OSPF Sederhana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) (Created page with " center|900px|thumb ==Sambungan== R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3:...") |
Onnowpurbo (talk | contribs) (→OSPF) |
||
| Line 73: | Line 73: | ||
log syslog all; | log syslog all; | ||
router id 10.10.1.1; | router id 10.10.1.1; | ||
| − | protocol kernel { | + | |
| − | + | ipv4 table master4; | |
| − | + | ipv6 table master6; | |
| − | + | ipv4 table mcast4; | |
| − | + | ipv6 table mcast6; | |
| + | ipv4 table mtab4; | ||
| + | ipv6 table mtab6; | ||
| + | vpn4 table vpntab4; | ||
| + | vpn6 table vpntab6; | ||
| + | vpn4 table vpn4mc; | ||
| + | vpn6 table vpn6mc; | ||
| + | flow4 table flowtab4; | ||
| + | flow6 table flowtab6; | ||
| + | |||
| + | protocol device { | ||
| + | } | ||
| + | protocol kernel kernel4 { | ||
| + | ipv4 { | ||
| + | export all; | ||
| + | }; | ||
} | } | ||
| − | protocol | + | protocol direct { |
| − | + | ipv4; | |
| − | + | interface "eth1" , "eth2" , "eth3" , "eth4" ; | |
| − | |||
} | } | ||
protocol ospf { | protocol ospf { | ||
| Line 108: | Line 122: | ||
killall ripd | killall ripd | ||
killall ripngd | killall ripngd | ||
| − | killall | + | killall bird |
| − | + | bird | |
R2: | R2: | ||
| Line 120: | Line 134: | ||
log syslog all; | log syslog all; | ||
router id 10.10.1.6; | router id 10.10.1.6; | ||
| − | protocol kernel { | + | |
| − | + | ipv4 table master4; | |
| − | + | ipv6 table master6; | |
| − | + | ipv4 table mcast4; | |
| − | + | ipv6 table mcast6; | |
| + | ipv4 table mtab4; | ||
| + | ipv6 table mtab6; | ||
| + | vpn4 table vpntab4; | ||
| + | vpn6 table vpntab6; | ||
| + | vpn4 table vpn4mc; | ||
| + | vpn6 table vpn6mc; | ||
| + | flow4 table flowtab4; | ||
| + | flow6 table flowtab6; | ||
| + | |||
| + | protocol device { | ||
| + | } | ||
| + | protocol kernel kernel4 { | ||
| + | ipv4 { | ||
| + | export all; | ||
| + | }; | ||
} | } | ||
| − | protocol | + | protocol direct { |
| − | + | ipv4; | |
| − | + | interface "eth1" , "eth2" , "eth3" , "eth4" ; | |
| − | |||
} | } | ||
protocol ospf { | protocol ospf { | ||
| Line 156: | Line 184: | ||
killall ripd | killall ripd | ||
killall ripngd | killall ripngd | ||
| − | killall | + | killall bird |
| − | + | bird | |
R3: | R3: | ||
| Line 168: | Line 196: | ||
log syslog all; | log syslog all; | ||
router id 10.10.1.2; | router id 10.10.1.2; | ||
| − | protocol kernel { | + | |
| − | + | ipv4 table master4; | |
| − | + | ipv6 table master6; | |
| − | + | ipv4 table mcast4; | |
| − | + | ipv6 table mcast6; | |
| + | ipv4 table mtab4; | ||
| + | ipv6 table mtab6; | ||
| + | vpn4 table vpntab4; | ||
| + | vpn6 table vpntab6; | ||
| + | vpn4 table vpn4mc; | ||
| + | vpn6 table vpn6mc; | ||
| + | flow4 table flowtab4; | ||
| + | flow6 table flowtab6; | ||
| + | |||
| + | protocol device { | ||
| + | } | ||
| + | protocol kernel kernel4 { | ||
| + | ipv4 { | ||
| + | export all; | ||
| + | }; | ||
} | } | ||
| − | protocol | + | protocol direct { |
| − | + | ipv4; | |
| − | + | interface "eth1" , "eth2" , "eth3" , "eth4" ; | |
| − | |||
} | } | ||
protocol ospf { | protocol ospf { | ||
| Line 204: | Line 246: | ||
killall ripd | killall ripd | ||
killall ripngd | killall ripngd | ||
| − | killall | + | killall bird |
| − | + | bird | |
==Verify== | ==Verify== | ||
Revision as of 07:08, 18 January 2019
Sambungan
R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet
R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3: -- LAN 172.16.1.1/16
R3: eth1: -- R1: eth1 eth2: -- R2: eth2 eth3: -- LAN 192.168.1.1/24
IP address
Reset konfigurasi OpenWRT menggunakan teknik BIRD: dari OpenWRT
R1:
ifconfig eth1 10.10.1.1 netmask 255.255.255.252 ifconfig eth2 10.10.1.5 netmask 255.255.255.252 ifconfig eth3 192.168.122.100 netmask 255.255.255.0 ifconfig eth3 192.168.122.101 netmask 255.255.255.0 ifconfig eth3 192.168.122.102 netmask 255.255.255.0
Router2:
ifconfig eth1 10.10.1.6 netmask 255.255.255.252 ifconfig eth2 10.10.1.9 netmask 255.255.255.252 ifconfig eth3 172.16.1.1 netmask 255.255.0.0
Router3:
ifconfig eth1 10.10.1.2 netmask 255.255.255.252 ifconfig eth2 10.10.1.10 netmask 255.255.255.252 ifconfig eth3 192.168.1.1 netmask 255.255.255.0
OSPF
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
log syslog all; router id 10.10.1.1;
ipv4 table master4;
ipv6 table master6;
ipv4 table mcast4;
ipv6 table mcast6;
ipv4 table mtab4;
ipv6 table mtab6;
vpn4 table vpntab4;
vpn6 table vpntab6;
vpn4 table vpn4mc;
vpn6 table vpn6mc;
flow4 table flowtab4;
flow6 table flowtab6;
protocol device {
}
protocol kernel kernel4 {
ipv4 {
export all;
};
}
protocol direct {
ipv4;
interface "eth1" , "eth2" , "eth3" , "eth4" ;
}
protocol ospf {
import all;
export all;
area 0 {
# networks {
# 10.10.1.0/30;
# 10.10.1.4/30;
# };
interface eth1, eth2, eth3 {
cost 5;
type broadcast;
hello 5; retransmit 2; wait 10; dead 20;
};
};
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird bird
R2:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
log syslog all; router id 10.10.1.6;
ipv4 table master4;
ipv6 table master6;
ipv4 table mcast4;
ipv6 table mcast6;
ipv4 table mtab4;
ipv6 table mtab6;
vpn4 table vpntab4;
vpn6 table vpntab6;
vpn4 table vpn4mc;
vpn6 table vpn6mc;
flow4 table flowtab4;
flow6 table flowtab6;
protocol device {
}
protocol kernel kernel4 {
ipv4 {
export all;
};
}
protocol direct {
ipv4;
interface "eth1" , "eth2" , "eth3" , "eth4" ;
}
protocol ospf {
import all;
export all;
area 0 {
# networks {
# 10.10.1.4/30;
# 10.10.1.8/30;
# 172.16.0.0/16;
# };
interface "eth1", "eth2", "eth3" {
cost 5;
type broadcast;
hello 5; retransmit 2; wait 10; dead 20;
};
};
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird bird
R3:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
log syslog all; router id 10.10.1.2;
ipv4 table master4;
ipv6 table master6;
ipv4 table mcast4;
ipv6 table mcast6;
ipv4 table mtab4;
ipv6 table mtab6;
vpn4 table vpntab4;
vpn6 table vpntab6;
vpn4 table vpn4mc;
vpn6 table vpn6mc;
flow4 table flowtab4;
flow6 table flowtab6;
protocol device {
}
protocol kernel kernel4 {
ipv4 {
export all;
};
}
protocol direct {
ipv4;
interface "eth1" , "eth2" , "eth3" , "eth4" ;
}
protocol ospf {
import all;
export all;
area 0 {
# networks {
# 10.10.1.0/30;
# 10.10.1.8/30;
# 192.168.1.0/24;
# };
interface "eth1", "eth2", "eth3" {
cost 5;
type broadcast;
hello 5; retransmit 2; wait 10; dead 20;
};
};
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird bird
Verify
Cek R1, R2, R3
show protocols ospf1 show ospf show route
Referensi
- https://wiki.mikrotik.com/wiki/Manual:OSPF-examples
- https://github.com/BIRD/bird/blob/master/doc/bird.conf.example
Pranala Menarik