Difference between revisions of "BIRD: OSPF Sederhana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) (→OSPF) |
Onnowpurbo (talk | contribs) (→OSPF) |
||
| Line 68: | Line 68: | ||
edit | edit | ||
| + | log syslog all; | ||
router id 10.10.1.1; | router id 10.10.1.1; | ||
| − | + | protocol kernel { | |
| − | + | learn; # Learn all alien routes from the kernel | |
| − | + | persist; # Don't remove routes on bird shutdown | |
| − | + | scan time 20; # Scan kernel routing table every 20 seconds | |
| − | + | import none; # Default is import all | |
| − | + | export all; # Default is export none | |
| − | + | } | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
protocol device { | protocol device { | ||
| + | scan time 10; # Scan interfaces every 10 seconds | ||
} | } | ||
protocol ospf 10.10.1.1 { | protocol ospf 10.10.1.1 { | ||
Revision as of 11:20, 17 January 2019
Sambungan
R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet
R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3: -- LAN 172.16.1.1/16
R3: eth1: -- R1: eth1 eth2: -- R2: eth2 eth3: -- LAN 192.168.1.1/24
IP address
R1:
ifconfig eth1 10.10.1.1 netmask 255.255.255.252 ifconfig eth2 10.10.1.5 netmask 255.255.255.252 ifconfig eth3 192.168.122.100 netmask 255.255.255.0 ifconfig eth3 192.168.122.101 netmask 255.255.255.0 ifconfig eth3 192.168.122.102 netmask 255.255.255.0
Router2:
ifconfig eth1 10.10.1.6 netmask 255.255.255.252 ifconfig eth2 10.10.1.9 netmask 255.255.255.252 ifconfig eth3 172.16.1.1 netmask 255.255.0.0
Router3:
ifconfig eth1 10.10.1.2 netmask 255.255.255.252 ifconfig eth2 10.10.1.10 netmask 255.255.255.252 ifconfig eth3 192.168.1.1 netmask 255.255.255.0
OSPF
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
log syslog all;
router id 10.10.1.1;
protocol kernel {
learn; # Learn all alien routes from the kernel
persist; # Don't remove routes on bird shutdown
scan time 20; # Scan kernel routing table every 20 seconds
import none; # Default is import all
export all; # Default is export none
}
protocol device {
scan time 10; # Scan interfaces every 10 seconds
}
protocol ospf 10.10.1.1 {
area 0 {
networks {
10.10.1.0/30;
10.10.1.4/30;
}
interface eth1 {
neighbors {
10.10.1.2;
};
interface eth2 {
neighbors {
10.10.1.6;
};
};
};
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
R2:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
router id 10.10.1.6;
ipv4 table master4;
ipv6 table master6;
ipv4 table mcast4;
ipv6 table mcast6;
ipv4 table mtab4;
ipv6 table mtab6;
vpn4 table vpntab4;
vpn6 table vpntab6;
vpn4 table vpn4mc;
vpn6 table vpn6mc;
flow4 table flowtab4;
flow6 table flowtab6;
protocol device {
}
protocol ospf 10.10.1.6 {
area 0 {
networks {
10.10.1.4/30;
10.10.1.8/30;
172.16.0.0/16;
}
interface eth1 {
neighbors {
10.10.1.5;
};
interface eth2 {
neighbors {
10.10.1.10;
};
};
};
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
R3:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
router id 10.10.1.2;
ipv4 table master4;
ipv6 table master6;
ipv4 table mcast4;
ipv6 table mcast6;
ipv4 table mtab4;
ipv6 table mtab6;
vpn4 table vpntab4;
vpn6 table vpntab6;
vpn4 table vpn4mc;
vpn6 table vpn6mc;
flow4 table flowtab4;
flow6 table flowtab6;
protocol device {
}
protocol ospf 10.10.1.2 {
area 0 {
networks {
10.10.1.0/30;
10.10.1.8/30;
192.168.1.0/24;
}
interface eth1 {
neighbors {
10.10.1.1;
};
interface eth2 {
neighbors {
10.10.1.9;
};
};
};
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
Verify
Cek R1, R2, R3
show ip ospf database show ip ospf neighbor show ip ospf route show ip route
Referensi
- https://wiki.mikrotik.com/wiki/Manual:OSPF-examples
- https://github.com/BIRD/bird/blob/master/doc/bird.conf.example
Pranala Menarik