Difference between revisions of "BIRD: OSPF Sederhana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) (→OSPF) |
||
| Line 73: | Line 73: | ||
commit | commit | ||
exit | exit | ||
| + | |||
| + | protocol ospf 10.10.1.1 { | ||
| + | area 0 { | ||
| + | networks { | ||
| + | 10.10.1.0/30; | ||
| + | 10.10.1.4/30; | ||
| + | } | ||
| + | interface <interface pattern> { | ||
| + | neighbors { | ||
| + | <ip>; | ||
| + | <ip> eligible; | ||
| + | }; | ||
| + | }; | ||
| + | }; | ||
| + | } | ||
| + | |||
Revision as of 16:50, 16 January 2019
Sambungan
R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet
R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3: -- LAN 172.16.1.1/16
R3: eth1: -- R1: eth1 eth2: -- R2: eth2 eth3: -- LAN 192.168.1.1/24
IP address
R1:
ifconfig eth1 10.10.1.1 netmask 255.255.255.252 ifconfig eth2 10.10.1.5 netmask 255.255.255.252 ifconfig eth3 192.168.122.100 netmask 255.255.255.0 ifconfig eth3 192.168.122.101 netmask 255.255.255.0 ifconfig eth3 192.168.122.102 netmask 255.255.255.0
Router2:
ifconfig eth1 10.10.1.6 netmask 255.255.255.252 ifconfig eth2 10.10.1.9 netmask 255.255.255.252 ifconfig eth3 172.16.1.1 netmask 255.255.0.0
Router3:
ifconfig eth1 10.10.1.2 netmask 255.255.255.252 ifconfig eth2 10.10.1.10 netmask 255.255.255.252 ifconfig eth3 192.168.1.1 netmask 255.255.255.0
OSPF
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1:
configure set protocols ospf area 0 network 10.10.1.0/30 set protocols ospf area 0 network 10.10.1.4/30 set protocols ospf log-adjacency-changes set protocols ospf parameters router-id 10.10.1.1
show show protocols commit exit
protocol ospf 10.10.1.1 {
area 0 {
networks {
10.10.1.0/30;
10.10.1.4/30;
}
interface <interface pattern> {
neighbors {
<ip>;
<ip> eligible;
};
};
};
}
R2:
configure set protocols ospf area 0 network 10.10.1.4/30 set protocols ospf area 0 network 10.10.1.8/30 set protocols ospf area 0 network 172.16.0.0/16 set protocols ospf log-adjacency-changes set protocols ospf parameters router-id 10.10.1.6
show show protocols commit exit
R3:
configure set protocols ospf area 0 network 10.10.1.0/30 set protocols ospf area 0 network 10.10.1.8/30 set protocols ospf area 0 network 192.168.1.0/24 set protocols ospf log-adjacency-changes set protocols ospf parameters router-id 10.10.1.2
show show protocols commit exit
Verify
Cek R1, R2, R3
show ip ospf database show ip ospf neighbor show ip ospf route show ip route
Referensi
Pranala Menarik