Difference between revisions of "Cisco: BGP Dua Link main backup"

From OnnoWiki
Jump to navigation Jump to search
(Created page with "center|900px|thumb Ada tiga (3) ISP ISP1: IP 192.168.1.1/24 menuju ISP3 IP 192.168.3.1/24 menuju ISP2 AS 10 IP 10.100.100.0/24 IP 10.100.20...")
 
Line 150: Line 150:
 
     neighbor 192.168.2.2 activate  
 
     neighbor 192.168.2.2 activate  
 
   end
 
   end
 +
 +
 +
==Main / Backup Link Setup di ISP3==
 +
 +
Lakukan
 +
* accept network kita sendiri
 +
* drop semua tabel IP lainnya, karena kita tidak mau menjadi transit provider
 +
* BGP AS prepend - menaikan AS path ke salah satu ISP (disini ISP1)
 +
  
 
ISP3:
 
ISP3:
Line 162: Line 171:
 
     neighbor 192.168.1.1 remote-as 10
 
     neighbor 192.168.1.1 remote-as 10
 
     neighbor 192.168.2.1 remote-as 20
 
     neighbor 192.168.2.1 remote-as 20
 +
    neighbor 198.168.1.1 route-map PREPEND out
 +
    route-map PREPEND permit 10
 +
    set as-path prepend 30 30 30
 
     neighbor 192.168.1.1 activate
 
     neighbor 192.168.1.1 activate
 
     neighbor 192.168.2.1 activate   
 
     neighbor 192.168.2.1 activate   
 
   end
 
   end
 
 
 
==Main/Backup link setup==
 
 
===ISP3===
 
 
Lakukan
 
* accept network kita sendiri
 
* drop semua tabel IP lainnya, karena kita tidak mau menjadi transit provider
 
* BGP AS prepend - menaikan AS path
 
 
Outgoing filter ke ISP1:
 
 
/routing filter
 
#accept our networks
 
add chain=isp1-out prefix=10.1.1.0/24 action=accept
 
add chain=isp1-out prefix=10.1.2.0/24 action=accept
 
#discard the rest
 
add chain=isp1-out action=discard
 
 
Outgoing filter ke ISP2:
 
 
/routing filter
 
#accept our networks and prepend AS path three times
 
add chain=isp2-out prefix=10.1.1.0/24 action=accept set-bgp-prepend=3
 
add chain=isp2-out prefix=10.1.2.0/24 action=accept set-bgp-prepend=3
 
#discard the rest
 
add chain=isp2-out action=discard
 
 
ISP1 menjadi main
 
ISP2 menjadi backup
 
 
/routing filter
 
add chain=isp1-in action=discard
 
add chain=isp2-in action=discard
 
 
/ip route
 
add gateway=192.168.1.1 check-gateway=ping
 
add gateway=192.168.2.1 distance=30 check-gateway=ping
 
 
 
 
 
  
 
==Cek==
 
==Cek==

Revision as of 10:25, 27 December 2018

Bgp-multihoming.png

Ada tiga (3) ISP

ISP1:

IP 192.168.1.1/24 menuju ISP3
IP 192.168.3.1/24 menuju ISP2
AS 10
IP 10.100.100.0/24
IP 10.100.200.0/24

ISP2

IP 192.168.2.1/24 - menuju ISP3
IP 192.168.3.2/24 - menuju ISP1
AS 20
IP 10.10.10.0/24
IP 10.10.20.0/24

ISP3 (kita)

IP 192.168.1.2/24 - menuju ISP1
IP 192.168.2.2/24 - menuju ISP2
AS 30
IP 10.1.1.0/24
IP 10.1.2.0/24 


Sambungan Fisik

ISP1


ISP1 Eth1/0 -> ISP3 Eth1/0
ISP1 Eth1/1 -> ISP2 Eth1/1
ISP2 Eth1/0 -> ISP3 Eth1/1

ISP1 Eth1/2 10.100.100.1/24
ISP1 Eth1/3 10.100.200.1/24

ISP2 Eth1/2 10.10.10.1/24
ISP2 Eth1/3 10.10.20.1/24

ISP3 Eth1/2 10.1.1.1/24
ISP3 Eth1/3 10.1.2.1/24


Setup connection

ISP1

enable
configure terminal
  interface Ethernet1/0
    ip address 192.168.1.1 255.255.255.0
    no shutdown
    exit
  interface Ethernet1/1
    ip address 192.168.3.1 255.255.255.0
    no shutdown
    exit
  interface Ethernet1/2
    ip address 10.100.100.1 255.255.255.0
    no shutdown
    exit
  interface Ethernet1/3
    ip address 10.100.200.1 255.255.255.0
    no shutdown
    exit
 end

ISP2

enable
configure terminal
  interface Ethernet1/0
    ip address 192.168.2.1 255.255.255.0
    no shutdown
    exit
  interface Ethernet1/1
    ip address 192.168.3.2 255.255.255.0
    no shutdown
    exit
  interface Ethernet1/2
    ip address 10.10.10.1 255.255.255.0
    no shutdown
    exit
  interface Ethernet1/3
    ip address 10.10.20.1 255.255.255.0
    no shutdown
    exit
 end

ISP3

enable
configure terminal
  interface Ethernet1/0
    ip address 192.168.1.2 255.255.255.0
    no shutdown
    exit
  interface Ethernet1/1
    ip address 192.168.2.2 255.255.255.0
    no shutdown
    exit
  interface Ethernet1/2
    ip address 10.1.1.1 255.255.255.0
    no shutdown
    exit
  interface Ethernet1/3
    ip address 10.1.2.1 255.255.255.0
    no shutdown
    exit
 end

BGP Peering

Consider that IP connectivity between ISPs edge routers and Our Core router is already set up and working properly. So we can start to establish BGP peering to both ISPs.


ISP1:

enable
configure terminal
  router bgp 10
  bgp router-id 192.168.1.1
    ! address-family ipv4 unicast 
    network 10.100.100.0 mask 255.255.255.0
    network 10.100.200.0 mask 255.255.255.0
    neighbor 192.168.3.2 remote-as 20
    neighbor 192.168.1.2 remote-as 30
    neighbor 192.168.3.2 activate 
    neighbor 192.168.1.2 activate 
    ! neighbor 192.168.3.2 default-originate 
    ! neighbor 192.168.1.2 default-originate
  end

ISP2:


enable
configure terminal
  router bgp 20
  bgp router-id 192.168.2.1
    ! address-family ipv4 unicast
    network 10.10.10.0 mask 255.255.255.0
    network 10.10.20.0 mask 255.255.255.0
    neighbor 192.168.3.1 remote-as 10
    neighbor 192.168.2.2 remote-as 30
    neighbor 192.168.3.1 activate 
    neighbor 192.168.2.2 activate 
  end


Main / Backup Link Setup di ISP3

Lakukan

  • accept network kita sendiri
  • drop semua tabel IP lainnya, karena kita tidak mau menjadi transit provider
  • BGP AS prepend - menaikan AS path ke salah satu ISP (disini ISP1)


ISP3:

enable
configure terminal
  router bgp 30
  bgp router-id 192.168.1.2
    ! address-family ipv4 unicast
    network 10.1.1.0 mask 255.255.255.0
    network 10.1.2.0 mask 255.255.255.0
    neighbor 192.168.1.1 remote-as 10
    neighbor 192.168.2.1 remote-as 20
    neighbor 198.168.1.1 route-map PREPEND out
    route-map PREPEND permit 10
    set as-path prepend 30 30 30
    neighbor 192.168.1.1 activate
    neighbor 192.168.2.1 activate  
  end

Cek

show ip route
show ip bgp 10.100.1000.0/24
show ip bgp neighbors 192.168.2.2 advertised-routes
show ip bgp neighbor 192.168.1.1 routes
show bgp ipv4 unicast neighbors 
show bgp ipv4 unicast summary

Referensi

Pranala Menarik