Difference between revisions of "Cisco: OSPF multi-area network"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 1: | Line 1: | ||
[[File:Image6006.gif|center|900px|thumb]] | [[File:Image6006.gif|center|900px|thumb]] | ||
| + | |||
| + | ==Topology Jaringan== | ||
| + | |||
| + | R1: | ||
| + | eth1: -- R2: eth1 | ||
| + | eth2: -- R3: eth1 | ||
| + | |||
| + | R2: | ||
| + | eth1: -- R1: eth1 | ||
| + | eth2: -- R4: eth1 | ||
| + | eth3: -- nat0: Internet | ||
| + | |||
| + | R3: | ||
| + | eth1: -- R1: eth2 | ||
| + | eth2: -- LAN: 192.168.1.1/24 | ||
| + | |||
| + | R4: | ||
| + | eth1: -- R2: eth2 | ||
| + | eth2: -- LAN: 192.168.2.1/24 | ||
| Line 5: | Line 24: | ||
R1: | R1: | ||
| − | |||
/ip address add address=10.0.1.1/30 interface=ether1 | /ip address add address=10.0.1.1/30 interface=ether1 | ||
| Line 11: | Line 29: | ||
R2: | R2: | ||
| − | |||
/ip address add address=10.0.1.2/30 interface=ether1 | /ip address add address=10.0.1.2/30 interface=ether1 | ||
Revision as of 08:18, 25 December 2018
Topology Jaringan
R1:
eth1: -- R2: eth1 eth2: -- R3: eth1
R2:
eth1: -- R1: eth1 eth2: -- R4: eth1 eth3: -- nat0: Internet
R3:
eth1: -- R1: eth2 eth2: -- LAN: 192.168.1.1/24
R4:
eth1: -- R2: eth2 eth2: -- LAN: 192.168.2.1/24
Setup IP address
R1:
/ip address add address=10.0.1.1/30 interface=ether1 /ip address add address=10.1.1.1/30 interface=ether2
R2:
/ip address add address=10.0.1.2/30 interface=ether1 /ip address add address=10.1.2.1/30 interface=ether2 /ip dhcp-client add interface=ether3 disabled=no # kalau ether3 DHCP client /ip firewall nat add chain=srcnat out-interface=ether3 action=masquareade /ip firewall nat print
R3:
/ip address add address=10.1.1.2/30 interface=ether1 /ip address add address=192.168.1.1/24 interface=ether2
R4:
/ip address add address=10.1.2.2/30 interface=ether1 /ip address add address=192.168.2.1/24 interface=ether2
Setup OSPF
R1:
/routing ospf instance enable default /routing ospf area add name=area1 area-id=0.0.0.1 /routing ospf network add network=10.0.1.0/24 area=backbone /routing ospf network add network=10.1.1.0/30 area=area1
R2:
/routing ospf instance enable default /routing ospf area add name=area2 area-id=0.0.0.2 /routing ospf network add network=10.0.1.0/24 area=backbone /routing ospf network add network=10.1.2.0/30 area=area2
R3 configuration:
/routing ospf instance enable default /routing ospf area add name=area1 area-id=0.0.0.1 /routing ospf network add network=10.1.1.0/30 area=area1
R4 configuration:
/routing ospf instance enable default /routing ospf area add name=area2 area-id=0.0.0.2 /routing ospf network add network=10.1.2.0/30 area=area2
Cek route
R3:
/routing ospf interface print
/routing ospf neighbor print
/ip route print
Redistribute Connected
/routing ospf instance set 0 redistribute-connected=as-type-1 /routing ospf instance print
Cek
/routing ospf interface print /routing ospf neighbor print /ip route print