Difference between revisions of "Juniper: Shutdown Reboot"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | ==Reset / Meng-NOL-kan System== | ||
| + | request system zeroize | ||
| − | |||
| − | + | ==Power off== | |
| − | |||
request system power-off | request system power-off | ||
| − | |||
| − | + | ==Halt== | |
| − | + | request system halt | |
| − | + | * Wait until a message appears on the console confirming that the operating system has halted. For information about the request system halt command, see the Junos OS command documentation. | |
| − | + | * Disconnect power from the switch by pulling out the male end of the power cord connected the power source outlet. | |
| − | == | + | ==Reboot== |
| − | |||
| − | |||
request system reboot | request system reboot | ||
| Line 27: | Line 24: | ||
==To restart the switch from the front panel:== | ==To restart the switch from the front panel:== | ||
| − | + | * From the LCD front panel menu push the Menu button. | |
| − | + | * When the MAIN MENU (Maintenance menu) appears, press the Enter button. | |
| − | + | * Select the SYSTEM REBOOT option and press the Enter button. | |
| − | + | * To exit the menu without rebooting the switch, press the Menu button again. | |
| + | |||
| + | ==Pranala Menarik== | ||
| + | |||
| + | * [[Juniper]] | ||
Latest revision as of 03:53, 25 December 2018
Reset / Meng-NOL-kan System
request system zeroize
Power off
request system power-off
Halt
request system halt
- Wait until a message appears on the console confirming that the operating system has halted. For information about the request system halt command, see the Junos OS command documentation.
- Disconnect power from the switch by pulling out the male end of the power cord connected the power source outlet.
Reboot
request system reboot
This command will also notify other users connected to the switch about the operation.
To restart the switch from the front panel:
- From the LCD front panel menu push the Menu button.
- When the MAIN MENU (Maintenance menu) appears, press the Enter button.
- Select the SYSTEM REBOOT option and press the Enter button.
- To exit the menu without rebooting the switch, press the Menu button again.