Difference between revisions of "Mikrotik: OSPF Sederhana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 33: | Line 33: | ||
R1: | R1: | ||
| − | /routing ospf instance | + | /routing ospf instance add name=default |
| + | /routing ospf instance enable default | ||
R2: | R2: | ||
| − | /routing ospf instance | + | /routing ospf instance add name=default |
| + | /routing ospf instance enable default | ||
R3: | R3: | ||
| − | /routing ospf instance | + | /routing ospf instance add name=default |
| − | + | /routing ospf instance enable default | |
Cek | Cek | ||
Revision as of 11:21, 13 November 2018
Router1:
/ip address add address=10.10.1.1/30 interface=ether1 /ip address add address=10.10.1.5/30 interface=ether2 /ip address add address=210.13.1.0/28 interface=ether3 # kalau ether3 statik /ip dhcp-client add interface=ether3 disabled=no # kalau ether3 DHCP client
Router2:
/ip address add address=10.10.1.6/30 interface=ether1 /ip address add address=10.10.1.9/30 interface=ether2 /ip address add address=172.16.1.0/16 interface=ether3
Router3:
/ip address add address=10.10.1.2 /30 interface=ether1 /ip address add address=10.10.1.10/30 interface=ether2 /ip address add address=192.168.1.0/24 interface=ether3
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut
R1:
/routing ospf instance add name=default /routing ospf instance enable default
R2:
/routing ospf instance add name=default /routing ospf instance enable default
R3:
/routing ospf instance add name=default /routing ospf instance enable default
Cek
/routing ospf instance> print
Flags: X - disabled
0 name="default" router-id=0.0.0.0 distribute-default=never
redistribute-connected=as-type-1 redistribute-static=as-type-1
redistribute-rip=no redistribute-bgp=no redistribute-other-ospf=no
metric-default=1 metric-connected=20 metric-static=20 metric-rip=20
metric-bgp=auto metric-other-ospf=auto in-filter=ospf-in
out-filter=ospf-out
Buat bridge "loopback" untuk R1, R2, R3
/interface bridge add name=loopback /ip address add address=10.255.255.1/32 interface=loopback /routing ospf instance set 0 router-id=10.255.255.1
Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1
/routing ospf network add network=210.13.1.0/28 area=backbone /routing ospf network add network=0.0.0.0/0 area=backbone # default ke Internet /routing ospf network add network=10.10.1.0/30 area=backbone /routing ospf network add network=10.10.1.4/30 area=backbone
R2
/routing ospf network add network=10.10.1.4/30 area=backbone /routing ospf network add network=10.10.1.8/30 area=backbone /routing ospf network add network=172.16.0.0/16 area=backbone
R3
/routing ospf network add network=10.10.1.0/30 area=backbone /routing ospf network add network=10.10.1.8/30 area=backbone /routing ospf network add network=192.168.1.0/24 area=backbone
Atau kalau di aggregate
R1:
/routing ospf network add network=10.10.1.0/24 area=backbone
R2:
/routing ospf network add network=172.16.0.0/16 area=backbone /routing ospf network add network=10.10.1.0/24 area=backbone
R3:
/routing ospf network add network=192.168.1.0/24 area=backbone /routing ospf network add network=10.10.1.0/24 area=backbone
Verify
Cek
R1:
/routing ospf interface print /routing ospf neighbor print /ip route print
Lakukan yang sama untuk R2, R3
Referensi