Difference between revisions of "OpenWRT: Flash UBNT Bullet M2"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 11: | Line 11: | ||
/usr/sbin/fwupdate -m | /usr/sbin/fwupdate -m | ||
| + | |||
| + | |||
| + | Firmware Install Ubnt Recovery Method | ||
| + | |||
| + | If you prefer TFTP, than you can update via holding down the reset-button for 10 seconds on startup, and send the firmware to 192.168.1.20 | ||
Revision as of 16:15, 28 November 2013
Firmware Install
To flash an already running bullet with original firmware (AirOS) on CLI, you must do this:
ssh root@yourbullet
url="http://downloads.openwrt.org/snapshots/trunk/ar71xx" url="$url/openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin" wget -O /tmp/fwupdate.bin "$url" /usr/sbin/fwupdate -m
Firmware Install Ubnt Recovery Method
If you prefer TFTP, than you can update via holding down the reset-button for 10 seconds on startup, and send the firmware to 192.168.1.20