Difference between revisions of "IPv6 Kernel: IPv6 entri di /proc/net/"
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 4: | Line 4: | ||
==if_inet6== | ==if_inet6== | ||
| − | + | Type: Satu line per address berisi beberapa nilai | |
| − | + | Disini semua address IPv6 yang di konfigurasi di simpan dalam format khusus. Contoh disini adalah interface loopback (lo). Artinya dapat dilihat di bawah. Untuk keterangan lebih lanjut bisa membaca di “net/ipv6/addrconf.c” | |
# cat /proc/net/if_inet6 | # cat /proc/net/if_inet6 | ||
| Line 24: | Line 24: | ||
==ipv6_route== | ==ipv6_route== | ||
| − | + | Type: Satu line per route berisi banyak nilai | |
Here all configured IPv6 routes are shown in a special format. The example displays for loopback interface only. The meaning is shown below (see “net/ipv6/route.c” for more). | Here all configured IPv6 routes are shown in a special format. The example displays for loopback interface only. The meaning is shown below (see “net/ipv6/route.c” for more). | ||
| Line 54: | Line 54: | ||
==sockstat6== | ==sockstat6== | ||
| − | + | Type: One line per protocol with description and value | |
Statistics about used IPv6 sockets. Example: | Statistics about used IPv6 sockets. Example: | ||
Revision as of 13:05, 3 July 2013
Di /proc/net ada beberapa entri yang sifatnya read-only. Entri ini tidak bisa di baca mnggunakan “sysctl”, oleh karenanya gunakan “cat”.
if_inet6
Type: Satu line per address berisi beberapa nilai
Disini semua address IPv6 yang di konfigurasi di simpan dalam format khusus. Contoh disini adalah interface loopback (lo). Artinya dapat dilihat di bawah. Untuk keterangan lebih lanjut bisa membaca di “net/ipv6/addrconf.c”
# cat /proc/net/if_inet6
00000000000000000000000000000001 01 80 10 80 lo +------------------------------+ ++ ++ ++ ++ ++ | | | | | | 1 2 3 4 5 6
- IPv6 address displayed in 32 hexadecimal chars without colons as separator
- Netlink device number (interface index) in hexadecimal (see “ip addr” , too)
- Prefix length in hexadecimal
- Scope value (see kernel source “ include/net/ipv6.h” and “net/ipv6/addrconf.c” for more)
- Interface flags (see “include/linux/rtnetlink.h” and “net/ipv6/addrconf.c” for more)
- Device name
ipv6_route
Type: Satu line per route berisi banyak nilai
Here all configured IPv6 routes are shown in a special format. The example displays for loopback interface only. The meaning is shown below (see “net/ipv6/route.c” for more).
# cat /proc/net/ipv6_route
00000000000000000000000000000000 00 00000000000000000000000000000000 00 +------------------------------+ ++ +------------------------------+ ++ | | | | 1 2 3 4
¬ 00000000000000000000000000000000 ffffffff 00000001 00000001 00200200 lo ¬ +------------------------------+ +------+ +------+ +------+ +------+ ++ ¬ | | | | | | ¬ 5 6 7 8 9 10
- IPv6 destination network displayed in 32 hexadecimal chars without colons as separator
- IPv6 destination prefix length in hexadecimal
- IPv6 source network displayed in 32 hexadecimal chars without colons as separator
- IPv6 source prefix length in hexadecimal
- IPv6 next hop displayed in 32 hexadecimal chars without colons as separator
- Metric in hexadecimal
- Reference counter
- Use counter
- Flags
- Device name
sockstat6
Type: One line per protocol with description and value
Statistics about used IPv6 sockets. Example:
# cat /proc/net/sockstat6
TCP6: inuse 11 UDP6: inuse 3 UDPLITE6: inuse 0 RAW6: inuse 0 FRAG6: inuse 0 memory 0
tcp6
To be filled.
udp6
To be filled.
igmp6
To be filled.
raw6
To be filled.
ip6_flowlabel
To be filled.
rt6_stats
To be filled.
snmp6
Type: One line per SNMP description and value
SNMP statistics, can be retrieved via SNMP server and related MIB table by network management software.
ip6_tables_names
Available netfilter6 tables