Difference between revisions of "IPv6 Kernel: IPv6 entri di proc/sys/net/ipv4/"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) (New page: 11.3. IPv6-related entries in /proc/sys/net/ipv4/ At the moment (and this will be until IPv4 is completly converted to an independend kernel module) some switches are also used here for I...) |
Onnowpurbo (talk | contribs) |
||
Line 1: | Line 1: | ||
− | + | At the moment (and this will be until IPv4 is completly converted to an independend kernel module) some switches are also used here for IPv6. | |
− | + | ==ip_*== | |
− | + | ||
− | + | ===ip_local_port_range=== | |
This control setting is used by IPv6 also. | This control setting is used by IPv6 also. | ||
− | + | ||
+ | ===tcp_*=== | ||
This control settings are used by IPv6 also. | This control settings are used by IPv6 also. | ||
− | + | ||
+ | ==icmp_*== | ||
This control settings are not used by IPv6. To enable ICMPv6 rate limiting (which is very recommended because of the capability of ICMPv6 storms) netfilter-v6 rules must be used. | This control settings are not used by IPv6. To enable ICMPv6 rate limiting (which is very recommended because of the capability of ICMPv6 storms) netfilter-v6 rules must be used. | ||
− | + | ||
+ | ==others== | ||
Unknown, but probably not used by IPv6. | Unknown, but probably not used by IPv6. |
Revision as of 16:33, 2 July 2013
At the moment (and this will be until IPv4 is completly converted to an independend kernel module) some switches are also used here for IPv6.
ip_*
ip_local_port_range
This control setting is used by IPv6 also.
tcp_*
This control settings are used by IPv6 also.
icmp_*
This control settings are not used by IPv6. To enable ICMPv6 rate limiting (which is very recommended because of the capability of ICMPv6 storms) netfilter-v6 rules must be used.
others
Unknown, but probably not used by IPv6.