Difference between revisions of "IPv6 Route: Menambahkan IPv6 route melalui sebuah gateway"

Latest revision as of 07:52, 23 May 2013

Jika dibutuhkan untuk menjangkau jaringan di luar dengan IPv6 melalui router yang IPv6-enabled

Penggunaan

# /sbin/ip -6 route add <ipv6network>/<prefixlength> via <ipv6address> [dev <device>]

Contoh

# /sbin/ip -6 route add 2000::/3 via 2001:0db8:0:f101::1

Penggunaan

# /sbin/route -A inet6 add <ipv6network>/<prefixlength> gw <ipv6address> [dev <device>]

Device dapat dibutuhkan, jika IPv6 address dari gateway ada di link local.

Contoh berikut akan menambahkan route ke global address (2000::/3) melalui gateway 2001:0db8:0:f101::1

# /sbin/route -A inet6 add 2000::/3 gw 2001:0db8:0:f101::1

@@ Line 1: / Line 1: @@
-.2. Add an IPv6 route through a gateway
+Jika dibutuhkan untuk menjangkau jaringan di luar dengan IPv6 melalui router yang IPv6-enabled
-Mostly needed to reach the outside with IPv6 using an IPv6-enabled router on your link.
 ==Menggunakan "ip"==
@@ Line 19: / Line 18: @@
   # /sbin/route -A inet6 add <ipv6network>/<prefixlength> gw <ipv6address> [dev <device>]
-A device can be needed, too, if the IPv6 address of the gateway is a link local one.
+Device dapat dibutuhkan, jika IPv6 address dari gateway ada di link local.
-Following shown example adds a route for all currently global addresses (2000::/3) through gateway 2001:0db8:0:f101::1
+Contoh berikut akan menambahkan route ke global address (2000::/3) melalui gateway 2001:0db8:0:f101::1
   # /sbin/route -A inet6 add 2000::/3 gw 2001:0db8:0:f101::1