Difference between revisions of "ADS-B: Instalasi gr-air-modes"

From OnnoWiki
Jump to navigation Jump to search
Line 83: Line 83:
 
Jalankan menggunakan perintah
 
Jalankan menggunakan perintah
  
  uhd_modes.py -d -P  
+
  modes_rx -d -P
  
 +
Keluar
 +
 +
gr-air-modes warning: numpy+scipy not installed, FlightGear interface not supported
 +
gr-osmosdr supported device types: file fcd rtl rtl_tcp
 +
Using device #0: ezcap USB 2.0 DVB-T/DAB/FM dongle
 +
Found Elonics E4000 tuner
 +
Gain is 34
 +
Rate is 4000000
 +
Using Volk machine: ssse3_32
 +
>>> gr_fir_ccf: using SSE
  
 
==Catatan Antenna==
 
==Catatan Antenna==

Revision as of 12:53, 16 October 2012

Persiapan

Buat directory

mkdir /usr/local/src/SDR
cd /usr/local/src/SDR

Instalasi paket pendukung

sudo apt-get install cmake swig libcppunit-dev python-cheetah doxygen \
libboost-all-dev python-sphinx fftw3-dev python-numpy libqwt-dev \
libusb++-dev libusb-dev libusb-1.0-0-dev libgsl0-dev python-wxgtk2.6 git qtcreator

Install GNURadio

Lakukan

cd /usr/local/src/SDR
git clone git://gnuradio.org/gnuradio

Compile

cd /usr/local/src/SDR/gnuradio
mkdir build
cd build
cmake ../
make
sudo make install
sudo ldconfig

Install rtl_sdr

Lakukan

cd /usr/local/src/SDR
git clone git://git.osmocom.org/rtl-sdr.git

Masuk ke directory rtl-sdr & lakukan

cd /usr/local/src/SDR/rtl-sdr/
mkdir build
cd build
cmake ../
make
sudo make install
sudo ldconfig

Aturan udev yang penting agar USB dongle terdetek dengan baik perlu di copy menggunakan perintah berikut

cd /usr/local/src/SDR/rtl-sdr/
sudo cp rtl-sdr.rules /etc/udev/rules.d/40-basic-permissions.rules
/etc/init.d/udev restart

Kita dapat meng-unplug & replug USB dongle. Cek menggunakan perintah

lsusb

Keluar

Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 006 Device 002: ID 1bcf:0005 Sunplus Innovation Technology Inc. 
Bus 001 Device 003: ID 0bda:2838 Realtek Semiconductor Corp.

Instalasi gr-air-modes

Lakukan

cd /usr/local/src/SDR
git clone https://github.com/bistromath/gr-air-modes.git
cd /usr/local/src/SDR/gr-air-modes/
mkdir build
cd build
cmake ..
make
sudo make install
sudo ldconfig

Jalankan gr-air-modes

Jalankan menggunakan perintah

modes_rx -d -P

Keluar

gr-air-modes warning: numpy+scipy not installed, FlightGear interface not supported
gr-osmosdr supported device types: file fcd rtl rtl_tcp 
Using device #0: ezcap USB 2.0 DVB-T/DAB/FM dongle
Found Elonics E4000 tuner
Gain is 34
Rate is 4000000
Using Volk machine: ssse3_32
>>> gr_fir_ccf: using SSE

Catatan Antenna

with a piece of wire in the rtl283 antenna socket resulted in decodes from one aircraft almost overhead. Time for a better 1090MHz antenna. The J pole previously used was easy to build from 2 pieces of semi rigid cable so time to make another.It was tuned with a tracking generator/directional coupler/ spectrum analyser and achieved 32dB retun loss after tweaking. Putting this on the end of 35' of cable in the loft resulted in many more decodes and a torrent of data in the terminal:-


Membuat Virtual Radar

Next time to plot the data. The article pointed to Virtual radar server at http://www.virtualradarserver.co.uk/Mono.aspx so this was installed. Launching it with and clicking on the http link for local host resulted in the following map with 8 aircraft:-

The rtl2832 is not as sensitive as the Modesbeast I also have but it is only 5% of the cost!

Referensi

Pranala Menarik