Difference between revisions of "ADS-B: Instalasi gr-air-modes"
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
Line 79: | Line 79: | ||
sudo ldconfig | sudo ldconfig | ||
− | + | ==Jalankan gr-air-modes== | |
+ | Jalankan menggunakan perintah | ||
uhd_modes.py -d -P | uhd_modes.py -d -P | ||
+ | |||
+ | |||
+ | ==Catatan Antenna== | ||
Line 88: | Line 92: | ||
+ | |||
+ | ==Membuat Virtual Radar== | ||
Next time to plot the data. The article pointed to Virtual radar server at http://www.virtualradarserver.co.uk/Mono.aspx so this was installed. Launching it with and clicking on the http link for local host resulted in the following map with 8 aircraft:- | Next time to plot the data. The article pointed to Virtual radar server at http://www.virtualradarserver.co.uk/Mono.aspx so this was installed. Launching it with and clicking on the http link for local host resulted in the following map with 8 aircraft:- | ||
The rtl2832 is not as sensitive as the Modesbeast I also have but it is only 5% of the cost! | The rtl2832 is not as sensitive as the Modesbeast I also have but it is only 5% of the cost! | ||
− | |||
− | |||
==Referensi== | ==Referensi== |
Revision as of 12:47, 16 October 2012
Persiapan
Buat directory
mkdir /usr/local/src/SDR cd /usr/local/src/SDR
Instalasi paket pendukung
sudo apt-get install cmake swig libcppunit-dev python-cheetah doxygen \ libboost-all-dev python-sphinx fftw3-dev python-numpy libqwt-dev \ libusb++-dev libusb-dev libusb-1.0-0-dev libgsl0-dev python-wxgtk2.6 git qtcreator
Install GNURadio
Lakukan
cd /usr/local/src/SDR git clone git://gnuradio.org/gnuradio
Compile
cd /usr/local/src/SDR/gnuradio mkdir build cd build cmake ../ make sudo make install sudo ldconfig
Install rtl_sdr
Lakukan
cd /usr/local/src/SDR git clone git://git.osmocom.org/rtl-sdr.git
Masuk ke directory rtl-sdr & lakukan
cd /usr/local/src/SDR/rtl-sdr/ mkdir build cd build cmake ../
make sudo make install sudo ldconfig
Aturan udev yang penting agar USB dongle terdetek dengan baik perlu di copy menggunakan perintah berikut
cd /usr/local/src/SDR/rtl-sdr/ sudo cp rtl-sdr.rules /etc/udev/rules.d/40-basic-permissions.rules /etc/init.d/udev restart
Kita dapat meng-unplug & replug USB dongle. Cek menggunakan perintah
lsusb
Keluar
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 006 Device 002: ID 1bcf:0005 Sunplus Innovation Technology Inc. Bus 001 Device 003: ID 0bda:2838 Realtek Semiconductor Corp.
Instalasi gr-air-modes
Lakukan
cd /usr/local/src/SDR git clone https://github.com/bistromath/gr-air-modes.git
cd /usr/local/src/SDR/gr-air-modes/ mkdir build cd build cmake .. make sudo make install sudo ldconfig
Jalankan gr-air-modes
Jalankan menggunakan perintah
uhd_modes.py -d -P
Catatan Antenna
with a piece of wire in the rtl283 antenna socket resulted in decodes from one aircraft almost overhead. Time for a better 1090MHz antenna. The J pole previously used was easy to build from 2 pieces of semi rigid cable so time to make another.It was tuned with a tracking generator/directional coupler/ spectrum analyser and achieved 32dB retun loss after tweaking. Putting this on the end of 35' of cable in the loft resulted in many more decodes and a torrent of data in the terminal:-
Membuat Virtual Radar
Next time to plot the data. The article pointed to Virtual radar server at http://www.virtualradarserver.co.uk/Mono.aspx so this was installed. Launching it with and clicking on the http link for local host resulted in the following map with 8 aircraft:-
The rtl2832 is not as sensitive as the Modesbeast I also have but it is only 5% of the cost!
Referensi
- http://www.irrational.net/2012/08/06/tracking-planes-for-20-or-less/
- http://g4fre.blogspot.com/2012/09/ads-b-using-ubuntu-and-rtl2832.html
- http://www.hamradioscience.com/the-rtl-2832u-sdr-and-ads-b/