Difference between revisions of "UBNT: Upload Firmware"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 29: | Line 29: | ||
==Cek UBNT== | ==Cek UBNT== | ||
| − | * | + | * Device UBNT jangan dimatikan. |
| − | * | + | * Device UBNT di diamkan dulu. |
* Tunggu sekitar 1 menit-an | * Tunggu sekitar 1 menit-an | ||
* ping 192.168.1.20 | * ping 192.168.1.20 | ||
Revision as of 12:40, 21 July 2012
Teknik upload firmware sama dengan teknik recovery
- Set IP PC 192.168.1.x
- Pindah ke folder tempat image, misalnya
~/ubnt-4.x/SDK.UBNT.v4.0.1.4978/rootfs/XS2.ar2316.v4.0.1.SDK.120721.0508
- Matikan Device UBNT
- Tekan tombol Reset
- Nyalakan Device UBNT
- Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah.
- Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
- tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update', misalnya,
tftp 192.168.1.20 tftp> binary tftp> trace tftp> put XS2.ar2316.v4.0.1.SDK.120721.0508.bin flash_update .. .. sent DATA <block=6228, 512 bytes> received ACK <block=6228> sent DATA <block=6229, 351 bytes> received ACK <block=6229> Sent 3189087 bytes in 23.6 seconds tftp> quit
Cek UBNT
- Device UBNT jangan dimatikan.
- Device UBNT di diamkan dulu.
- Tunggu sekitar 1 menit-an
- ping 192.168.1.20
- Semoga ada responds :) ...