Difference between revisions of "NTP: File ntp.conf"

From OnnoWiki
Jump to navigation Jump to search
 
Line 61: Line 61:
 
* [[NTP]]
 
* [[NTP]]
 
* [[Linux Howto]]
 
* [[Linux Howto]]
 +
* [[Instalasi NTP]]
 
* [[NTP: Port 123]]
 
* [[NTP: Port 123]]
 
* [[NTP: File ntp.conf]]
 
* [[NTP: File ntp.conf]]
 +
* [[NTP: Tranparant Proxy untuk NTP]]
 +
* [[NTP: DNS Spoofing NTP]]
 +
* [[NTP: Set waktu mengunakan ntpdate]]
 +
* [[NTP: Setup NTP Server Lokal]]
 +
* [[Waktu date menggunakan command line]]

Latest revision as of 14:58, 11 March 2012

Contoh file ntp.conf di ProxMox

# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help

driftfile /var/lib/ntp/ntp.drift 


# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable


# You do need to talk to an NTP server or two (or three).
#server ntp.your-provider.example

# pool.ntp.org maps to about 1000 low-stratum NTP servers.  Your server will
# pick a different set every time it starts up.  Please consider joining the
# pool: <http://www.pool.ntp.org/join.html>
server 0.debian.pool.ntp.org iburst dynamic
server 1.debian.pool.ntp.org iburst dynamic
server 2.debian.pool.ntp.org iburst dynamic
server 3.debian.pool.ntp.org iburst dynamic
 

# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support /AccessRestrictions>
# might also be helpful.
#
#  Note that "restrict" applies to both servers and clients, so a configuration
#  that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default kod notrap nomodify nopeer noquery
restrict -6 default kod notrap nomodify nopeer noquery

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust

# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet, de-comment the
# next lines.  Please do this only if you trust everybody on the network!
#disable auth
#broadcastclient


Pranala Menarik