Difference between revisions of "Instalasi KVM"
Onnowpurbo (talk | contribs) (New page: Prerequisites You will need (see download section): * qemu-kvm-release.tar.gz * kvm-kmod-release.tar.bz2 (if you want/need to compile kernel modules yourself) * A VT capable...) |
Onnowpurbo (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | + | ==Prasyarat== | |
| − | + | kita akan membutuhkan | |
| − | + | * qemu-kvm-release.tar.gz | |
| − | + | * kvm-kmod-release.tar.bz2 (if you want/need to compile kernel modules yourself) | |
| − | + | * A VT capable Intel processor, or an SVM capable AMD processor | |
| − | + | * qemu prerequisites: | |
| − | + | o `zlib` libraries and headers | |
| − | + | o `SDL` libraries and headers | |
| − | + | o `alsa` libraries and headers (optional alsa support: disabled by default but can be enabled with --enable-alsa) | |
| − | + | o `gnutls` libraries and headers (optional VNC TLS support: enabled by default but can be disabled with --disable-vnc-tls) | |
| − | + | o kernel headers (on Fedora, the kernel-devel package) | |
| − | + | Di Debian etch atau Ubuntu 10.10 | |
apt-get install gcc libsdl1.2-dev zlib1g-dev libasound2-dev linux-kernel-headers pkg-config libgnutls-dev libpci-dev | apt-get install gcc libsdl1.2-dev zlib1g-dev libasound2-dev linux-kernel-headers pkg-config libgnutls-dev libpci-dev | ||
| − | + | Jika membuat dari git, kita juga akan membutuhkan gawk | |
| − | + | ==Membuka dan mengkonfigurasi komponen KVM== | |
| − | |||
| − | |||
You may wish to take a look at the ["Kernel-optimizations"] page. There exists a [attachment:kvm-26-alt-grab.diff.gz patch] which will change the SDL keygrab combination from ctrl-alt to ctrl-alt-shift. It was written primarily to deal with the heavy use of ctrl-alt-delete in NT-based VMs. | You may wish to take a look at the ["Kernel-optimizations"] page. There exists a [attachment:kvm-26-alt-grab.diff.gz patch] which will change the SDL keygrab combination from ctrl-alt to ctrl-alt-shift. It was written primarily to deal with the heavy use of ctrl-alt-delete in NT-based VMs. | ||
| Line 27: | Line 25: | ||
If you are using a recent kernel (2.6.25+) with kvm modules included, boot into it, and: | If you are using a recent kernel (2.6.25+) with kvm modules included, boot into it, and: | ||
| − | tar xzf qemu-kvm-release.tar.gz | + | tar xzf qemu-kvm-release.tar.gz |
| − | cd qemu-kvm-release | + | cd qemu-kvm-release |
| − | ./configure --prefix=/usr/local/kvm | + | ./configure --prefix=/usr/local/kvm |
| − | make | + | make |
| − | sudo make install | + | sudo make install |
| − | sudo /sbin/modprobe kvm-intel | + | sudo /sbin/modprobe kvm-intel |
| − | # or: sudo /sbin/modprobe kvm-amd | + | # or: sudo /sbin/modprobe kvm-amd |
If you're using an older kernel, or a kernel from your distribution without the kvm modules, you'll have to compile the modules yourself: | If you're using an older kernel, or a kernel from your distribution without the kvm modules, you'll have to compile the modules yourself: | ||
Revision as of 07:22, 20 December 2010
Prasyarat
kita akan membutuhkan
- qemu-kvm-release.tar.gz
- kvm-kmod-release.tar.bz2 (if you want/need to compile kernel modules yourself)
- A VT capable Intel processor, or an SVM capable AMD processor
- qemu prerequisites:
o `zlib` libraries and headers o `SDL` libraries and headers o `alsa` libraries and headers (optional alsa support: disabled by default but can be enabled with --enable-alsa) o `gnutls` libraries and headers (optional VNC TLS support: enabled by default but can be disabled with --disable-vnc-tls) o kernel headers (on Fedora, the kernel-devel package)
Di Debian etch atau Ubuntu 10.10
apt-get install gcc libsdl1.2-dev zlib1g-dev libasound2-dev linux-kernel-headers pkg-config libgnutls-dev libpci-dev
Jika membuat dari git, kita juga akan membutuhkan gawk
Membuka dan mengkonfigurasi komponen KVM
You may wish to take a look at the ["Kernel-optimizations"] page. There exists a [attachment:kvm-26-alt-grab.diff.gz patch] which will change the SDL keygrab combination from ctrl-alt to ctrl-alt-shift. It was written primarily to deal with the heavy use of ctrl-alt-delete in NT-based VMs.
If you are using a recent kernel (2.6.25+) with kvm modules included, boot into it, and:
tar xzf qemu-kvm-release.tar.gz cd qemu-kvm-release ./configure --prefix=/usr/local/kvm make sudo make install sudo /sbin/modprobe kvm-intel # or: sudo /sbin/modprobe kvm-amd
If you're using an older kernel, or a kernel from your distribution without the kvm modules, you'll have to compile the modules yourself:
tar xjf kvm-kmod-release.tar.bz2 cd kvm-kmod-release ./configure make sudo make install sudo /sbin/modprobe kvm-intel
- or: sudo /sbin/modprobe kvm-amd
Note: if sound doesn't play in the guest vm you can add --audio-drv-list="alsa oss" to ./configure as explained in http://www.linux-kvm.com/content/sound-problem-solved [edit] Creating a disk image for the guest
/usr/local/kvm/bin/qemu-img create -f qcow2 vdisk.img 10G
[edit]
Installing a guest operating system
sudo /usr/local/kvm/bin/qemu-system-x86_64 -hda vdisk.img -cdrom /path/to/boot-media.iso \
-boot d -m 384
(kvm doesn't make a distinction between i386 and x86_64 so even in i386 you should use `qemu-system-x86_64`)BR
If you have less than 1GB of memory don't use the -m 384 flag (which allocates 384 MB of RAM for the guest). For computers with 512MB of RAM it's safe to use -m 192, or even -m 128 (the default) [edit] Running the newly-installed guest
sudo /usr/local/kvm/bin/qemu-system-x86_64 vdisk.img -m 384
or a slightly more complicated example, where it is assumed that bridged networking is available on tap0; see ["Kernel-optimizations"] for some setup hints:
/usr/local/kvm/bin/qemu-system-x86_64 -hda xp-curr.img -m 512 -soundhw es1370 -no-acpi -snapshot -localtime -boot c -usb -usbdevice tablet -net nic,vlan=0,macaddr=00:00:10:52:37:48 -net tap,vlan=0,ifname=tap0,script=no
(kvm doesn't make a distinction between i386 and x86_64 so even in i386 you should use `qemu-system-x86_64`)
If you're on Debian Etch, substitute `kvm` for `qemu-system-x86_64` (thanks to fromport, soren and mael_). See also the entries under the label "Ubuntu" on the HOWTO page. qemu-system-x86_64`
If you're on Fedora/RHEL/CentOS (and installed a kvm package and not built kvm yourself from source) then substitute qemu-kvm for qemu-system-x86_64