IPv6 Firewall: Penggunaan ufw - Revision history

Onnowpurbo: /* UFW Advanced Functionality */

2019-02-15T03:23:30Z

UFW Advanced Functionality

2019-02-15T03:18:22Z

Reset UFW Firewall

2019-02-15T03:17:15Z

Dry Run UFW Rules

2019-02-15T03:14:30Z

Delete UFW Rules

2019-02-15T03:11:07Z

Deny Connections on UFW

2019-02-15T03:08:42Z

Allow Specific Network Interface

2019-02-15T02:52:57Z

Allow Network Subnets to Specific Port

2019-02-15T02:49:44Z

Allow Specific IP Addresses on Specific Port

2019-02-15T02:46:30Z

Allow Specific IP Addresses

2019-02-15T02:45:00Z

Allow Port Ranges on UFW

@@ Line 202: / Line 202: @@
   sudo ufw status
-==UFW Advanced Functionality==
+==Fungsi Advanced UFW==
 ==Referensi==

@@ Line 197: / Line 197: @@
 ==Reset UFW Firewall==
-For one reason or the other, if you wish to delete / reset all firewall rules, type the following commands, it will revert all of your changes and start fresh.
+Untuk satu alasan atau yang lain, jika kia ingin menghapus / mengatur ulang semua aturan firewall, ketik perintah berikut, itu akan mengembalikan semua perubahan kita dan mulai yang baru.
-  $ sudo ufw reset
+  sudo ufw reset
-  $ sudo ufw status
+  sudo ufw status
 ==UFW Advanced Functionality==

@@ Line 189: / Line 189: @@
   sudo ufw delete allow 22/tcp
-==Dry Run UFW Rules==
+==Uji coba UFW Rule==
-You can run any ufw commands without actually making any changes in the system firewall using the --dry-run flag, this simply shows the changes that where suppose to happen.
+Kita dapat menjalankan perintah ufw tanpa benar-benar membuat perubahan di sistem firewall menggunakan flag ---dry-run, ini hanya menunjukkan perubahan yang seharusnya terjadi.
-  $ sudo ufw --dry-run enable
+  sudo ufw --dry-run enable
 ==Reset UFW Firewall==

@@ Line 164: / Line 164: @@
   sudo ufw deny from 11.12.13.0/24 to any port 443
-==Delete UFW Rules==
+==Delete UFW Rule==
-There are 2 ways to delete UFW rules, by rule number and by actual rule.
+Ada 2 cara untuk menghapus UFW rule, dengan nomor rule dan dengan rule yang sebenarnya.
-To delete a UFW rules by using rule number, first you need to list rules by numbers using the following command.
+Untuk menghapus UFW rule dengan menggunakan nomor rule, pertama-tama kita harus membuat daftar rule dengan angka menggunakan perintah berikut.
-  $ sudo ufw status numbered
+  sudo ufw status numbered
-Sample Output
+Contoh Output
   Status: active
@@ Line 181: / Line 181: @@
   [ 2] 80/tcp                     ALLOW IN    Anywhere
-To delete rule number 1, use the following command.
+Untuk men-delete rule nomor 1, gunakan perintah berikut.
-  $ sudo ufw delete 1
+  sudo ufw delete 1
-The second method is to delete a rule by using the actual rule, for example to delete a rule, specify the port number with protocol as shown.
+Metode kedua adalah menghapus rule dengan menggunakan rule yang sebenarnya, misalnya untuk menghapus rule, tentukan nomor port dengan protokol sebagai berikut.
-  $ sudo ufw delete allow 22/tcp
+  sudo ufw delete allow 22/tcp
 ==Dry Run UFW Rules==

@@ Line 151: / Line 151: @@
   sudo ufw allow in on eth2 to any port 22
-==Deny Connections on UFW==
+==Tolak Connection pada UFW==
-By default, all incoming connections are blocked, unless you have specifically open the connection on UFW. For example, you have opened the ports 80 and 443 and your web server is under attack from the unknown network 11.12.13.0/24.
+Secara default, semua koneksi yang masuk diblokir, kecuali kita secara khusus membuka koneksi di UFW. Misalnya, kita telah membuka port 80 dan 443 dan server web kita sedang diserang dari jaringan yang tidak dikenal 11.12.13.0/24.
-To block all connections from this particular 11.12.13.0/24 network range, you can use the following command.
+Untuk memblokir semua koneksi dari  jaringan tertentu 11.12.13.0/24, kita dapat menggunakan perintah berikut.
-  $ sudo ufw deny from 11.12.13.0/24
+  sudo ufw deny from 11.12.13.0/24
-If you only want to block connections on ports 80 and 443, you can use the following commands.
+Jika kita hanya ingin memblokir koneksi pada port 80 dan 443, kita dapat menggunakan perintah berikut.
-  $ sudo ufw deny from 11.12.13.0/24 to any port 80
+  sudo ufw deny from 11.12.13.0/24 to any port 80
-  $ sudo ufw deny from 11.12.13.0/24 to any port 443
+  sudo ufw deny from 11.12.13.0/24 to any port 443
 ==Delete UFW Rules==

@@ Line 145: / Line 145: @@
   sudo ufw allow from 192.168.1.0/24 to any port 22
-==Allow Specific Network Interface==
+==Mengijinkan Network Interface Tertentu==
-To allow connections to specific network interface eth2 for a particular port 22 (SSH), run the following command.
+Untuk mengijinkan koneksi ke antarmuka jaringan tertentu eth2 untuk port 22 (SSH) tertentu, jalankan perintah berikut.
-  $ sudo ufw allow in on eth2 to any port 22
+  sudo ufw allow in on eth2 to any port 22
 ==Deny Connections on UFW==

@@ Line 139: / Line 139: @@
   sudo ufw allow from 192.168.56.1 to any port 22
-==Allow Network Subnets to Specific Port==
+==Mengijinkan Network Subnet ke Port Tertentu==
-To allow connections for particular IP addresses ranging from 192.168.1.1 to 192.168.1.254 to port 22 (SSH), run the following command.
+Untuk mengizinkan koneksi untuk alamat IP tertentu mulai dari 192.168.1.1 hingga 192.168.1.254 ke port 22 (SSH), jalankan perintah berikut.
-  $ sudo ufw allow from 192.168.1.0/24 to any port 22
+  sudo ufw allow from 192.168.1.0/24 to any port 22
 ==Allow Specific Network Interface==

@@ Line 133: / Line 133: @@
   sudo ufw allow from 192.168.56.1
-==Allow Specific IP Addresses on Specific Port==
+==Ijinkan IP Address tertentu pada Port tertentu==
-To allow connection on a specific port (for example port 22) from your home machine with IP address of 192.168.56.1, then you need to add any port and the port number after the IP address as shown.
+Untuk mengijinkan koneksi pada port tertentu (misalnya port 22) dari mesin di rumah kita dengan alamat IP 192.168.56.1, maka kita perlu menambahkan any port dan nomor port setelah alamat IP sebagai berikut.
-  $ sudo ufw allow from 192.168.56.1 to any port 22
+  sudo ufw allow from 192.168.56.1 to any port 22
 ==Allow Network Subnets to Specific Port==

@@ Line 127: / Line 127: @@
   ufw allow 5000:5003/udp
-==Allow Specific IP Addresses==
+==Ijinkan IP Address tertentu==
-If you want to allow connections on all ports from specific IP address 192.168.56.1, then you need to specify from before the IP address.
+Jika kita ingin mengizinkan koneksi pada semua port dari alamat IP tertentu 192.168.56.1, maka kita harus allow from sebelum alamat IP.
-  $ sudo ufw allow from 192.168.56.1
+  sudo ufw allow from 192.168.56.1
 ==Allow Specific IP Addresses on Specific Port==

@@ Line 120: / Line 120: @@
   sudo ufw allow 'Apache Secure'
-==Allow Port Ranges on UFW==
+==Ijinkan Port Range di UFW==
-Assuming you have some applications that you want to run on a range of ports (5000-5003), you can add all these ports using following commands.
+Misalnya, kita memiliki beberapa aplikasi yang ingin kita jalankan di berbagai port (5000-5003), kita dapat menambahkan semua port ini menggunakan perintah berikut.
-  sudo ufw allow 5000:5003/tcp
+  ufw allow 5000:5003/tcp
-  sudo ufw allow 5000:5003/udp
+  ufw allow 5000:5003/udp
 ==Allow Specific IP Addresses==