View source for Cisco: NAT Dua Router Static Routing

[[File:SR1.png|center|400px|thumb]]


R1:
 Ethernet1/1 - ke Internet
 Ethernet1/2 - R2: Ethernet 1/1
 Ethernet1/3 - LAN

R2:
 Ethernet1/1 - R1: Ethernet1/2
 Ethernet1/2 - LAN


R1:

 enable
 configure terminal
   !
   ! NAT GNS3 gw 192.168.122.1
   interface ethernet1/1
     ip address 192.168.122.100 255.255.255.0
     ip address 192.168.122.101 255.255.255.0 secondary
     ip address 192.168.122.102 255.255.255.0 secondary
     ip nat outside
     no shutdown
     ip route 0.0.0.0 0.0.0.0 192.168.122.1
     ip nat pool no-overload 192.168.122.100 192.168.122.102 prefix 24
     ip nat inside source list 7 pool no-overload 
   interface ethernet1/2
     ip address 172.16.1.1 255.255.255.252
     ip nat inside
     no shutdown
     exit
   interface ethernet1/3
     ip address 192.168.1.1 255.255.255.0
     ip nat inside
     no shutdown
     exit
   ip route 192.168.2.0 255.255.255.0 172.16.1.2
   !
   ! access NAT permit ke LAN 192.168.1.0/24 & 192.168.2.0/24
   ! 192.168.2.0/24 berada di R2
   access-list 7 permit 192.168.1.0 0.0.0.255
   access-list 7 permit 192.168.2.0 0.0.0.255
   exit
 copy running-config startup-config

R2:

 enable
 config terminal
    interface ethernet1/1
     ip address 172.16.1.2 255.255.255.252
     no shutdown
     exit
   interface ethernet1/2
     ip address 192.168.2.1 255.255.255.0
     no shutdown
     exit
   ip route 192.168.1.0 255.255.255.0 172.16.1.1
   ip route 0.0.0.0 0.0.0.0 172.16.1.1
   exit
 copy running-config startup-config


==Test==

R1:

 ping 192.168.2.1

R2:

 ping 192.168.1.1


==Setting Client==

LAN 1 Client:

 ip 192.168.1.2
 gw 192.168.1.1


LAN 2 Client:

 ip 192.168.2.2
 gw 192.168.2.1



==Pranala Menarik==

* [[Cisco]]
* [[Cisco: NAT]]