View source for Mikrotik: Multiple Gateway - Load Balancing

Ada 2 sambungan ke Internet lewat ethe1 dan ether2

 # Kalau WAN IP Dynamic
 /ip dhcp-client print
 /ip dhcp-client add interface=ether1 disable=no
 /ip dhcp-client add interface=ether2 disable=no
 /ip route print


 # kalau WAN IP Statik dapat menggunakan perintah di bawah ini.
 /ip address
 add address=192.168.101.2/30 interface=ether1
 add address=192.168.102.2/30 interface=ether2
 add address=10.10.10.1/24 interface=wlan2
 /ip dns
 set allow-remote-requests=yes primary-dns=208.67.222.222 secondary-dns=208.67.220.220

 /ip route
 add dst-address=0.0.0.0/0 gateway=192.168.101.1 distance=1 check-gateway=ping
 add dst-address=0.0.0.0/0 gateway=192.168.102.1 distance=2 check-gateway=ping

Setup NAT

 /ip firewall nat
 add action=masquerade chain=srcnat out-interface=ether1
 add action=masquerade chain=srcnat out-interface=ether2

Setup LAN

 /interface bridge
 add name=bridge1
 /interface bridge port
 add bridge=bridge1 interface=ether3
 add bridge=bridge1 interface=ether4
 add bridge=bridge1 interface=ether ...dst s/d 8 (tergantung jumlah ethernet card yang dialokasikan).

 /ip address add interface=bridge1 address=172.16.100.1/24
 /ip route add gateway=bridge1

 /ip dns set servers=8.8.8.8
 /ip dns set allow-remote-request=yes

Setup DHCP Server dapat menggunakan

 /ip dhcp-server setup